Create subassemblies for Civil 3D with the user-friendly interface of Subassembly Composer. The Autodesk Subassembly Composer has been. When it comes to corridor modeling, Civil 3D provides a large number of subassembly parts right out of the box. Since these parts are also. One of the most common Sub-Components I get asked about is the Subassembly Composer for Civil 3D and so I am writing this helpful guide.
|Published (Last):||5 March 2014|
|PDF File Size:||18.98 Mb|
|ePub File Size:||5.64 Mb|
|Price:||Free* [*Free Regsitration Required]|
This subassembly works similar to the LinkWidthAndSlope generic subassembly, but this one subassemblly the length constant regardless of the slope. The codes used when creating a subassembly will work with the codes in the Code Set Styles, point codes will create feature lines, and links can be used for surface creation.
At tutoria, point you have already calculated all the parameters you need, so now it is time to create a point and a link using those parameters. Add another point element, which will be the bottom right corner of the subassembly. From the toolbox, drag and drop a Decision operator, which is in the Workflow category.
In AutoCAD we have been doing this for years by using workspaces containing specific combinations of tools, user profiles with specific configurations for system variables, and templates with pre-existing objects and styles. From the toolbox in the Miscellaneous category, drag Set Output Parameter and drop it into the flowchart.
Customizing with Subassembly Composer | AUGI – Autodesk User Group International
Now that you know how to use Subassembly Composer, go ahead and create your own subassemblies, draw them in your mind, then on paper, and then build the subassembly. Hover over one of the tabs in the tool palette, right-click and select New Palette. Add a point component by dragging it from the toolbox and dropping it into the flowchart window.
Set a default value for this parameter of 0. As an AutoCAD user, you are accustomed to drawing lines in a very visual way.
Use Subassembly Composer – Create a Civil 3D Subassembly – EnvisionCAD
Add another point element, which will be the top right corner of the subassembly. This will be the origin and insertion point. Name the new Subasswmbly Custom Subassemblies.
PI; this will convert the Atan into degrees.
Drag and drop an Auxiliary point and place it below the True label. For this point there is no need to modify anything else.
Switch to the Insert tab and from the Import panel select Import Subadsembly. This makes the compiser Subassembly Composer works seem a little weird, so when you design a subassembly it is always a good idea to start by drafting an outline by hand. Repeat the previous steps for the other parameters and make sure your parameters match what is shown in Figure 2. And because we have two different options, we will use a conditional operator.
In Subassembly Composer you can also create subassemblies that work with targets. At this point the subassembly is ready and it should look like Figure 3. Set the side to Right.
For this link there is no need to modify anything else. Name this parameter TopWidth with no spaces. Customize It and Make It Yours When we tutotial a program or a graphical user interface it usually is because we want to modify the way ttorial look and behave.
These values are calculated and used for other parameters.
Use Subassembly Composer – Create a Civil 3D Subassembly
Figure 5 shows the schematics of what we want to do and how it will look. It will be directly below the origin at a distance of negative Depth, which is a parameter previously defined, and no displacement in the X direction. You can solve this in Civil 3D if you create a closed civik, turn it into a subassembly, then assign codes, links, and shape and it probably would be fine.
The information found in the help menu for each subassembly gives you more information about each cojposer, shows you its anatomy, the components for which you can override dimensions by using targets, etc. Import into Civil 3D Now you can use the slanted curb subassembly like subassemblj regular curb subassembly.
Home Articles Customizing with Subassembly Composer. AutoCAD has some verticals with specialized tools to design and draft elements pertaining to different industries. Add this subassembly to the Custom Subassemblies palette the same way you did with the other subassembly. For Output Parameter select Atan and for value, type Math. By doing this we are converting the grade value into a slope value.
Drag and drop an Auxiliary point and place it below the Subasssembly label. This point will be used as the origin and subawsembly a reference for positioning the next point. Atan Slope ; this will give you the slope in radians. Now you have two parametric subassemblies made from scratch.
For this subassembly we will use output parameters that can be viewed as variables used for calculations. This point will use a point code so a feature line can be created when connecting multiple sections using this subassembly.
Customizing with Subassembly Composer
Miguel can be reached at mmedina prosoftnet. In the Import Subassemblies dialog, browse to where you saved your subassembly and open it. Add a point below the auxiliary point you just created and set its properties as shown in Figure 7.
The problem is that if you want to use different dimensions, you would have to create a new one. Drag and drop another point component. Add a point below tutoriak new auxiliary point.
When we customize a program we enhance our productivity because we adapt it to our specific needs. This is the name that this subassembly will use in Civil 3D. Preview is where you see how the subassembly looks as you are putting things together. Add another Output Parameter.